Top 10 Picatinny Rail Scope Mount – Sporting Optics Mounts

As an Amazon Associate I earn from qualifying purchases.

1. Modkin

 #ad

Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail 1 inch, Modkin Scope Rings, Set of 2

#ad
Modkin #ad - Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. The ring is for most scopes which are in 1 inch / 25.

4mm scope tube. With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily. Item height: 2 inch. Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope. Double scope ring mount for Picatinny/ Weaver Rail 21mm. High profile, 071 inch gap from base of mount to bottom of rings.
BrandModkin #ad
ManufacturerModkin #ad

2. Monstrum

 #ad

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

#ad
Monstrum #ad - Check the serial number on your rifle. Available in two styles - a 0 moa mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.

Please note that as of 9/2021, purchase the old pre 9/2021 compatible mount. Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics. Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms. All monstrum scope mounts and accessories come with a lifetime guarantee. For models manufactured after 9/2021 serial numbers above N936371, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. For models manufactured before 9/2021 Serial numbers below N936371, purchase the new Post 9/2021 compatible mount.
BrandMonstrum #ad
ManufacturerMonstrum #ad
Part NumberSAV-02

3. Modkin

 #ad

Modkin Rifle Scope Rings, Set of 2, Medium Profile Scope Mounts for Picatinny/Weaver Rail 1 inch

#ad
Modkin #ad - Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.

Medium profile, 05'' gap from base of mount to bottom of ring. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. Double scope ring mount for Picatinny/ Weaver Rail 21mm. With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily. The ring is for most scopes which are in 1''/ 25. 4mm scope tube. Item height: 1. 9''.
BrandModkin #ad
ManufacturerModkin #ad

4. Monstrum

 #ad

Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black

#ad
Monstrum #ad - Mounts to any flat top Picatinny rail equipped rifle. Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount. 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2. 5 inches of spacing between the rings. 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position. Dual ring scope mount for mounting standard 1 inch tube rifle scopes.
BrandMonstrum #ad
ManufacturerMonstrum #ad
Part NumberZR251-B

5. Monstrum

 #ad

Ruger 10/22 Picatinny Rail Mount for Scopes and Optics

#ad
Monstrum #ad - Installs via included set screws into the Ruger 10/22 factory mounting holes. Picatinny rail mount for Ruger 10/22 model rifles. Crafted from lightweight aluminum, 4. 5 inches in length and 1. 1 ounces in weight. Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics.
BrandMonstrum #ad
ManufacturerMonstrum #ad
Height6 Inches
Length1.3 Inches
Weight1.1 ounces
Width2 Inches
Part NumberZ70

6. Monstrum

 #ad

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles | 0 MOA

#ad
Monstrum #ad - Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required. Available in two styles - a 0 moa mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances. Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics. Picatinny/weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles. All monstrum scope mounts and accessories come with a lifetime guarantee.
BrandMonstrum #ad
ManufacturerMonstrum #ad
Part NumberMAR-02

7. ohhunt

 #ad

Ohhunt QD 1 inch 30mm Rings Integral Hunting 30mm Scope Mount Picatinny Rail for Optical Sight with Bubble Level

#ad
ohhunt #ad - Ring top Picatinny Rail. Bidirectional design to Offer Needed Offset in Diverse Applications. Robust and user friendly ergonomic Quick Detach Lever Fully Adjustable to Fit on Any Picatinny Rail. After installing the gasket, after removing the gasket, it can be used in the Scope of 25. 4mm pipe diameter, it can be used in the Scope of 30mm pipe diameter. Precision machined from Aircraft-grade Aluminum Alloy.
Brandohhunt #ad
Manufacturerohhunt #ad

8. UYUYHJS

 #ad

UYUYHJS Ruger 10/22 Picatinny Rail Mount for Scopes and Optics, Included 5 Hardened Steel Torx Screws and Torx-L Key Tamperproof Allen Wrench,Ruger 10 22 Accessories,Easy Install.

#ad
UYUYHJS #ad - Comfortably fit your red dots, compact scopes, and even short-mid range rifle scopes on to your Ruger 10/22. The rail sections are compatible with all Picatinny or Weaver based optics. Picatinny rail mount for ruger 10/22 model rifles, sporter, collector's, tactical, red dots, magnifiers, fits all ruger 10/22 Models:Takedown, Allows for the mounting of Picatinny or Weaver standard scopes, Target, or other optics, carbine, Compact, and 50th Anniversary.

Our products provide lifetime warranty. Installs via included set screws into the Ruger 10/22 factory mounting holes, easily without any modifications required.

Any dissatisfaction, please feel free to contact us at any time, our friendly customer service always stands behind our products and responds to all emails within 24 hours. Light in weight, anodized on the surface, yet strong and durable：crafted from lightweight 6061T6 Aircraft Grade Aluminum, 4.6 inches in length and 1. 2 ounces in weight, matt black.
BrandUYUYHJS #ad
ManufacturerUYUYHJS #ad
Height0.31 Inches
Length4.61 Inches
Width0.83 Inches

9. ohhunt

 #ad

Ohhunt Picatinny Ventilated Rib Rail Scope Mount 3.35inch

#ad
ohhunt #ad - These rails attach as low as possible on the ribs for a slim profile that provides minimal interference. On the sides of the transition bar has 2 pins, providing additional fixation. The principle of installation consists in transverse blades that pass through the holes in the ventilated plate and are attracted by two screws. Cnc machined from aluminium alloy with matte oxide finish. Don't fit on top of a picatinny rail, please pay attention to the size from pictures.
Brandohhunt #ad
Manufacturerohhunt #ad

10. Monstrum

 #ad

Monstrum Scope Mount with 45 Degree Offset Picatinny Rail Mount | 30 mm Diameter

#ad
Monstrum #ad - Dual ring scope mount for 30 mm tube scopes tubes with integrated 45 degree offset picatinny rail mount. Monstrum mount and accessory products come with a lifetime guarantee. Mounts to any flat top Picatinny rail equipped rifle platform. 45 degree offset rail mount allows for mounting of secondary sighting system for use at closer ranges. 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
BrandMonstrum #ad
ManufacturerMonstrum #ad
Part NumberZS313

30-90% Disocunts Found!

We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?

Disclaimer: We earn small fee from purchases made on Amazon.

Tags: