Top 10 One Piece Scope Mount – Sporting Optics Mounts

As an Amazon Associate I earn from qualifying purchases.

1. Scalarworks

#ad

Scalarworks Leap/09 Quick-Detach 34 mm One Piece Scope Ring Mount, Black Anodized Finish, 1.57" Height

#ad
Scalarworks #ad - Clickdrive - the most efficient quick-detach mechanism in existence. A multi-link hinge eliminates the uncertain and tedious setup. Lightweight and durable - engineered to be the lightest qD scope mount, without compromising an ounce of strength. A large diameter tubular section upfront resists torsion from side impacts and a wide I-beam bridge in the rear resists recoil-induced oscillations.

Visering - a low-profile design doesn't get in your way of viewing or manipulating scope's adjustment turrets. A pair of tapered screws lock into the base, bolstering structural rigidity. It is cnc milled from 7075-t6 aluminum billet, which is used where ultimate strength and durability outweigh cost considerations. An integrated set-screw lets you square your scope with your mount in record time.

High-performing - state-of-the-art 34 mm scope mount. Side kick enables you to supercharge your sighting system by adding a reflex sight in the optimal offset position. A fluted crown requires only the torque from your hand to securely clamp the mount onto a rail and uses the force from a spring-loaded ball detent to make it completely recoil-proof. Smart structure - its base incorporates different structural elements to maximize overall performance.
BrandScalarworks #ad
ManufacturerScalarworks #ad
Part NumberSW0910

2. MIZUGIWA

#ad

MIZUGIWA One Piece High Profile Scope Mount for Picatinny Weaver Rail 1" Dia

#ad
MIZUGIWA #ad - Fits all scopes with a one inch body tube. Mounts onto Picatinny/Weaver rails. Full length locking Plate to Guarantee Easy Installation and Secure Fit. One piece scope mount with Integral two 1" Rings. 3 clamping Screws.
BrandMIZUGIWA #ad
ManufacturerMizugiwa (BJ) Co.,Ltd #ad
Weight145 Grams
Part NumberMH0165

3. MIZUGIWA

#ad

MIZUGIWA One Piece High Profile Magnum Airgun Scope Mount with Stop Pin

#ad
MIZUGIWA #ad - Fits all scopes with a one inch body tube, Full length 4 inch. One piece scope mount with Integral two 1" Rings. 4 clamping screws, Fit 11mm Dovetail. Great for use on high power magnum air rifles. Threaded stop pin can be easily activated.
BrandMIZUGIWA #ad
ManufacturerMizugiwa (BJ) Co.,Ltd #ad
Weight130 Grams
Part NumberMH0164

4. Thompson Center

#ad

High, 1-Inch, Thompson Center One Piece Scope Base & Ring Combo

#ad
Thompson Center #ad - Specifically designed for optimal scope placement on the following rifle platforms: T/C encore, T/C triumph, T/C impact, T/C Omega. Lightweight, Machined, anodized billet aluminum. 1 inch high black scope rings. Designed for Use with Select Thompson/center rifle platforms.
BrandThompson Center #ad
ManufacturerBattenfeld Technologies #ad
Height1 Inches
Length1 Inches
Weight0.3 Pounds
Width1 Inches
Part Number1082709
Model1082709
Warranty1 Year Warranty

5. Ade Advanced Optics

#ad

1" inch, Ade Advanced Optics PS002 Cantilever One Piece Riflescope Mount

#ad
Ade Advanced Optics #ad - Weight 6oz. Our 3-bolt clamping systems with over 6, 500 lbs of clamping force hold your scope firmly to the rail. Ade cantilever mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.

The mount has no protruding levers, or knobs to rap your knuckles, gear, or get caught on clothing, bolts, and surroundings. This is a 1" inch one piece riflescope rings. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body. Screw torque - 15 in-lbs. Mounting rings are pushed forward 2" for better eye relief. Height" 1. 5". We are so confident in these mounts they are covered under our excellent Lifetime Warranty.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberPS002

6. Thompson Center

#ad

Medium, 1-Inch, Thompson Center One Piece Scope Base & Ring Combo

#ad
Thompson Center #ad - Designed for Use with Select Thompson/center rifle platforms. Specifically designed for optimal scope placement on the following rifle platforms: T/C encore, T/C triumph, T/C impact, T/C Omega.1 inch medium black scope rings. Lightweight, Machined, anodized billet aluminum.
BrandThompson Center #ad
ManufacturerBattenfeld Technologies #ad
Height1 Inches
Length1 Inches
Weight0.25 Pounds
Width1 Inches
Part Number1081894
Model1081894
Warranty1 Year Warranty

7. Hammers

#ad

Flat Top Offset One Piece QD Scope Mount with Quick Release Cam Locks 1913 Picatinny Rails

#ad
Hammers #ad - Works with both 30mm and 1inch main tube rifle scopes. Offset design for better eye relief position. Install in seconds with finger adjustable quick release cam locks. Fits onto flat top Picatinny rail. Machined from aircraft grade aluminum alloy.
BrandHammers #ad
ManufacturerHammers #ad
Weight0.7 Pounds
Part NumberSMOPQD
ModelSMOPQD

8. Hammers

#ad

Hammers One Piece Dovetail Scope Mount AM4L with Stop Pin for Magnum Airguns

#ad
Hammers #ad - 4 clamping screws at the bottom for max. Fits onto 3/8inch dovetail bases or grooved receiver top. Solid one piece design and built-in threaded stop pin for max. Good for 1inch tube full size rifle scopes with objective ODoutside diameter 40mm or less. Holding power. Holding power. Authentic airgun specialty Hammers products.
BrandHammers #ad
ManufacturerHammers #ad
Part NumberFBA_AM4L
ModelAM4L

9. Gogoku

#ad

Gogoku Rifle Scope Mount Rings One Piece Adjustable 1 inch 30mm with Scope Bubble Level Cantilever for 20mm Rail Dual Ring

#ad
Gogoku #ad - 30mm to 1” adapter come with a 30mm to 1” Adapter, the scope mount could fit for 1” and 30mm tube of scope. Extra rail on mount extra 20mm rail on the top of scope mount, so that you could install laser or red dot on the rings.

One piece design slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount. Stable screws 6 screws instead of 2 screws, make scope mount more stable and secure, hope your scope hold the recoil. Scope level use on bubble level of scope ring to ensure that the rifle is perfectly vertical, it will eliminate potential error.
BrandGogoku #ad
ManufacturerGogoku #ad

10. Tydeux

#ad

Tydeux 1" and 30mm One Piece Scope Mount with Dual Rings Lock Down Multi-Bolt 3 Screw Scope Mount

#ad
Tydeux #ad - Built-in tape protection. Size and rail1" to 30mm one piece scope mount, add or remove the internal rings in order to switch from 1" to 30mm diameter. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding position accurately.

Subtle designremovable internal ring - ideal for very compact riflescopes. Excellent materials, provide excellent waterproof performance. The product can still work normally in humid and harsh environment. High quality, offer durable safe performance in the field. Multi-bolt clamping bar with 3 screws, for an increased shockproof clamping surface to spread bolt torque over a greater area, to ensure a secure fit; even under recoil when shooting. High qualitypremium aircraft aluminum, solid, sturdy construction, build no wobble, high strength steel, at the same time extremely strong and lightweight.

Our scope rings perfect for standard picatinny/ weaver rails. Excellent performancethe product is very light and easy to carry. But when not in use, while maintaining strong and light weight, please store it in a dry and cool place. Mounting the base in the picatinny/weaver rail with an allen wrench, simple and quick to remove or install. Easy installationone piece design, easy to install, 4 bolts on each ring to ensure that your scope is not moving.
BrandTydeux #ad
ManufacturerTydeux #ad
Height2.26 Inches
Length3.94 Inches
Width1.81 Inches