As an Amazon Associate I earn from qualifying purchases.
Extended front handle length helps counter balance off center weighted loads. Quickly convert it back to the 2 pistol with larger accessory pocket version anytime by removing the module. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
Base foam is heavy duty, closed cell polyethylene which won't absorb moisture or oil. Easily convert the case from a 2 pistol accessory version to a 2 pistol with increased magazine capacity version by adding/leaving in, the magazine module. Adding the module increases magazine capacity to 18. Case is 100% shippable and airline approved for TSA checked luggage. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.

Base foam is heavy duty, pre-cut, mil-spec, non-abrasive, closed cell polyethylene which won't absorb moisture or oil. Case has a lifetime warranty, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Quickly convert it back to the 3 pistol & accessory version anytime by removing the modules.
Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Adding 1 module increases magazine capacity to 17 while adding both modules increases it to 23. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.

Max overall length of pistols is 12. 25". Holds up to 2 pistols revolvers or semi-autos with 4 extra magazines & 1 included silica gel. Do not settle for cheap and flimsy diced foam! diced foam tears easily, lasts a lifetime, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, can be cleaned easily, retains water rust!, collects dirt, does NOT tear easily, and will NOT disintigrate.

Do not settle for cheap and flimsy diced foam! diced foam tears easily, does not tear easily, collects dirt, and even if left untouched will eventually DISINTEGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, lasts a lifetime, can be cleaned easily, which does NOT absorb liquids, retains water rust!, and will NOT disintigrate.

625". Pistols and accessories not included. Comes with handy cutting blade for easy modifications. Holds up to 2 semi automatic pistols and 2 extra magazines, plus accessories.


Case fits two xl revolvers: one revolver up to 18. 25" in overall length, and One revolver up to 15. 35" in overall length. The pre-cut foam insert is closed cell military grade polyethylene which can be wiped clean.



Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Case has a lifetime warranty, is 100% waterproof ip67 & dustproof with a built-in pressure release valve.
Easily convert the case from a 6 pistol & accessory version to a 6 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 12 while adding both modules increases it to 20 Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Extended front handle length helps counter balance off center weighted loads.
1. Case Club
#ad
Waterproof with Silica Gel for Gun Rust Prevention Upgraded Gen-2, Heavy Duty, Case Club 2 Pistol & 18 Magazine Case with Accessory Pocket. Pre-Cut
#adCase Club #ad - Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Case has a lifetime warranty, non-abrasive, pre-cut, mil-spec, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Holds 2 pistols and up to 18 magazines with magazine module or 6 magazines with expanded accessory pocket +2 more in the magwells.Extended front handle length helps counter balance off center weighted loads. Quickly convert it back to the 2 pistol with larger accessory pocket version anytime by removing the module. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
More information #ad
Wide bodied snap latches can be used with thick gloves. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Base foam is heavy duty, closed cell polyethylene which won't absorb moisture or oil. Easily convert the case from a 2 pistol accessory version to a 2 pistol with increased magazine capacity version by adding/leaving in, the magazine module. Adding the module increases magazine capacity to 18. Case is 100% shippable and airline approved for TSA checked luggage. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Part Number | FBA_ASSYCC540SEPIS2A |
More information #ad
2. Case Club
#ad
Case Club 3 Pistol & Accessory & Up to 23 Magazines Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust Gen 2
#adCase Club #ad - Extended front handle length helps counter balance off center weighted loads. Case is 100% shippable and airline approved for TSA checked luggage. Easily convert the case from a 3 pistol & accessory version to a 3 pistol with increased magazine capacity version by adding/leaving in, the magazine modules.Base foam is heavy duty, pre-cut, mil-spec, non-abrasive, closed cell polyethylene which won't absorb moisture or oil. Case has a lifetime warranty, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Quickly convert it back to the 3 pistol & accessory version anytime by removing the modules.
More information #ad
Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Holds 3 pistols and up to 23 magazines with magazine modules or 9 magazines with accessory pocket +3 more in the magwells. Wide bodied snap latches can be used with thick gloves. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Adding 1 module increases magazine capacity to 17 while adding both modules increases it to 23. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Part Number | ASSYCC171163ISKPIS3A |
More information #ad
3. Case Club
#ad
Case Club 2 Revolver/Pistol Pre-Cut Top Loader Case with Silica Gel to Help Prevent Gun Rust
#adCase Club #ad - Extra storage space on top of the case. O-ring seal keeps out moisture, dust, and debris, while silica gel helps prevent gun rust. Not approved for airline travel.Max overall length of pistols is 12. 25". Holds up to 2 pistols revolvers or semi-autos with 4 extra magazines & 1 included silica gel. Do not settle for cheap and flimsy diced foam! diced foam tears easily, lasts a lifetime, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, can be cleaned easily, retains water rust!, collects dirt, does NOT tear easily, and will NOT disintigrate.
More information #ad
Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Part Number | ASSYCC6430TDFLREV2 |
More information #ad
4. Case Club
#ad
Case Club 2 Pistol 8 Magazine Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust
#adCase Club #ad - Case is airline Approved for checked luggage & padlockable. Case has a lifetime warranty & is 100% Waterproof, & Dustproof. Holds up to 2 pistols with 8 extra magazines & included silica gel.Do not settle for cheap and flimsy diced foam! diced foam tears easily, does not tear easily, collects dirt, and even if left untouched will eventually DISINTEGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, lasts a lifetime, can be cleaned easily, which does NOT absorb liquids, retains water rust!, and will NOT disintigrate.
More information #ad
Max length of pistols is 8 5/8" & not intended for revolvers.Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Part Number | ASSYCC2075IMPEPIS2 |
More information #ad
5. Case Club
#ad
Case Club Pre-Cut 2 Pistol & Accessory Carrying Case
#adCase Club #ad - This product is only the case with foam. Can accommodate underbarrel attachments such as flashlights or lasers. Not intended for revolvers. Accommodates subcompact up to full-size pistols max allowable length of pistol is 8.625". Pistols and accessories not included. Comes with handy cutting blade for easy modifications. Holds up to 2 semi automatic pistols and 2 extra magazines, plus accessories.
More information #ad
Do not settle for cheap and flimsy diced foam! diced foam tears easily, can be cleaned easily, collects dirt, does NOT tear easily, lasts a lifetime, and even if left untouched will eventually DISINTEGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, retains water rust!, which does NOT absorb liquids, and will NOT disintegrate.Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Height | 6 Inches |
Length | 17 Inches |
Width | 12 Inches |
Part Number | CC6792CCFLPIS2A |
More information #ad
6. Case Club
#ad
Case Club Single Pistol Pre-Cut Waterproof Case Gen 2
#adCase Club #ad - Case has a lifetime warrenty & is 100% Waterproof, & Dustproof. Do not settle for cheap and flimsy diced foam! diced foam tears easily, collects dirt, can be cleaned easily, which does NOT absorb liquids, does not tear easily, retains water rust!, lasts a lifetime, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, and will NOT disintigrate.More information #ad
The foam is already pre-cut to fit a pistol, so the customization work is already done for you! The case holds 1 semi-auto handgun & 2 extra magazines see "Pre-Cut Diagram" image for where the foam is pre-cut. Can accommodate under barrel attachments. Max length of pistols is 8 5/8" & not intended for revolvers.Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Part Number | ASSYCC300SEPIS1 |
More information #ad
7. Case Club
#ad
Case Club 2 Magnum Revolver Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust
#adCase Club #ad - Case has a lifetime warrenty & is 100% Waterproof, & Dustproof. Case is airline approved for checked luggage & padlockable with customer supplied padlock.Case fits two xl revolvers: one revolver up to 18. 25" in overall length, and One revolver up to 15. 35" in overall length. The pre-cut foam insert is closed cell military grade polyethylene which can be wiped clean.
More information #ad
The design will also fit smaller revolvers. Fits the s&w 500, performance center models, 460, blackhawks, taurus 454 Raging Bull, Big Bore Single Action Revolvers, ruger redhawks, Magnum Research BFR, and other similar sized or smaller revolvers.Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Height | 4.8 Inches |
Length | 21.5 Inches |
Width | 17.25 Inches |
Part Number | CC5020HXYWREV2 |
More information #ad
8. Case Club
#ad
Case Club 2 AR Pre-Cut Waterproof Rifle Case with Accessory Box & Silica Gel to Help Prevent Gun Rust Gen 2
#adCase Club #ad - Does not accommodate side attachments. Waterproof case comes with precut foam to hold 2 AR-15 or AR-10 Rifles, along with a Semi-Auto Pistol. Foam insert is closed cell high grade polyethylene which can be wiped clean.More information #ad
2 moisture removing silica gel canisters & waterproof accessory box & foam cutter are included. Case is airline approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Also holds extra magazines, gun attachments, optics, & various accessories.Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Part Number | ASSYCC108187PL2AR |
More information #ad
9. Case Club
#ad
Case Club 3 Gun Competition Pre-Cut Waterproof Case with Accessory Box and Silica Gel to Help Prevent Gun Rust Gen 2
#adCase Club #ad - Case is airline approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Waterproof case comes with precut foam to hold AR-15 or AR-10 Rifle, Shotgun, and Pistol. Moisture removing silica gel & waterproof accessory box & foam cutter are included.More information #ad
Foam insert is closed cell high grade polyethylene which can be wiped clean. Also holds extra magazines, optics, gun attachments, & various accessories. Does not accommodate side attachments.Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Part Number | ASSYCC108187PL3GUN |
More information #ad
10. Case Club
#ad
Case Club 6 Pistol & 20 Magazine Case with Accessory Pocket. Pre-Cut, Waterproof, Heavy Duty, with Silica Gel for Gun Rust Prevention Upgraded Gen-2
#adCase Club #ad - Base foam is heavy duty, pre-cut, mil-spec, non-abrasive, closed cell polyethylene which won't absorb moisture or oil. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. Case is 100% shippable and airline approved for TSA checked luggage.Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Case has a lifetime warranty, is 100% waterproof ip67 & dustproof with a built-in pressure release valve.
More information #ad
Quickly convert it back to the 6 pistol & accessory version anytime by removing the modules. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Easily convert the case from a 6 pistol & accessory version to a 6 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 12 while adding both modules increases it to 20 Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Extended front handle length helps counter balance off center weighted loads.
Brand | Case Club #ad |
Manufacturer | Case Club #ad |
Part Number | FBA_ASSYCC201173ISKPIS6A |
Model | 6 Pistol & Accessory Case |
More information #ad