Top 10 5 Round Magazine For AR15 – Ammunition & Magazine Pouches

As an Amazon Associate I earn from qualifying purchases.

1. Magpul

#ad

Magpul Minus 5 PMAG Round Limiter GEN M3 Pack of 3

#ad
Magpul #ad - Installation is simple, tool-less, and requires no permanent modification of the mag body. Installs in gen m3 pmag bodies, reducing the capacity by five rounds. Designed for sporting and hunting applications. Made in USA. Will not make a banned mag legal; Intended for TEMPORARY capacity reduction.
BrandMagpul #ad
ManufacturerBig Rock #ad
Height8 Inches
Length6 Inches
Weight0.1 Pounds
Width8 Inches
Part NumberMAG285-BLK
ModelMAG285-BLK

2. MTM

#ad

MTM TMC15 Tactical Mag Can

#ad
MTM #ad - Stackable design and triple padlock tabbed for security. Designed to hold 20 or 30 round rifle magazines in precut foam padding. Capacity: 15. Water-resistant O-ring seal for dry storage; Non-submersible. Dual latches for better sealing and prevents accidental openings; Made in USA.
BrandMTM #ad
ManufacturerMTM Case-Gard #ad
Height5 Inches
Length5 Inches
Weight0.38 Pounds
Width5 Inches
Part NumberTMC15
ModelTMC15

3. Magpul

#ad

Olive Drab Green, Magpul 223 Original Mag Assist Pack of 3

#ad
Magpul #ad - Made in USA. Patented design based upon the tried-and-true paracord loops and duct-tape tabs currently in use with special warfare units worldwide. Durable synthetic rubber loop with recessed rough gripping surface. Provides improved speed and controllability during high stress, tactical mag changes. Quick and easy installation and removal.
BrandMagpul #ad
ManufacturerMagpul Industries Corp. #ad
Length6.3 Inches
Weight0.04 Pounds
Part NumberMAG001-ODG
ModelMAG001-ODG

4. GunSkins

#ad

3 Pack, GunSkins AR-15 Mag Skins, Made in USA, Premium Vinyl Mag Wraps, Easy to Install and Fits 30rd Magazines, 100% Waterproof Non-Reflective Matte Finish, Proveil Victory

#ad
GunSkins #ad - No rain, no rust, no worries! Install in just a few hours. Removeable and leaves behind no residue – this non-permanent finish will not alter the resell value of your gun. The surface will be just as it was prior to installation. Use a heat gun to conform the vinyl to the surface and a hobby knife to trim to fit.

This gunskins product will be free of fading for the duration of the warranty period as long as initial user has the product correctly installed on a firearm, firearm accessory or other GunSkins approved application. Choose how much or how little to wrap with the help of our one-of-a-kind precut templates and installation videos. No cure time, ready for immediate use! Waterproof non-reflective matte finish – gunskins are made from high-performance, premium vinyl.

Easy to install vinyl wrap – do it yourself installation means you have creative control. This automotive grade vinyl is 100% waterproof and non-porous. Also works on airsoft mags, too! Kit includes pieces for the left and right sides for three magazines. Fits any ar-15 magazine – designed to fit any 30 rd 5. 56 x 45 nato. 223 remington ar-15 magazine, regardless of brand. This is perfect for hunting waterfowl when you are knee deep among the reeds.
BrandGunSkins #ad
ManufacturerGunSkins #ad
Height7 Inches
Length8.75 Inches
Weight3 ounces
Width0.25 Inches
Part Numberar-15-mag-skin-victory

5. Magpul

#ad

Black, Magpul Rifle Bipod, M-LOK

#ad
Magpul #ad - Optimized for rapid one-handed adjustmentS; quickly and quietly transitions between countless user configurations. Made of lightweight mil-spec hard anodized 6061 t-6 aluminum and injection-molded polymer; aesthetically pleasing, LOW-PROFILE DESIGN conceals its mechanisms and hardware, smoothly brushing off Snags and bumps.

An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Easily loaded with stabilizing forward tension without fear of failure or warping; at just over 11 oz.

The magpul bipod is lighter than many pricIER BIPODS currently on the market. Spring-tension legs stow neatly forward and snap down and lock into place with ONE HAND; LEG EXTENSIONS slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.
BrandMagpul #ad
ManufacturerMagpul Industries Corp #ad
Weight0.68 Pounds
Part NumberMAG933-BLK
ModelMAGBP

6. Magpul

#ad

Magpul 223 Dummy Rounds Pack of 5

#ad
Magpul #ad - Made in USA. Made from our proprietary hard polymer. Comes in a 5-Pack. 0223 remington dummy rounds.
BrandMagpul #ad
ManufacturerBig Rock #ad
Height0 Inches
Length0.05 Inches
Weight0.1 Pounds
Width0.06 Inches
Part NumberMAG215-BLK
ModelMAG215-BLK

7. GunSkins

#ad

GunSkins AR-15 Rifle Skin, Easy to Install and Fits Any AR15 or M4-100% Waterproof Non-Reflective Matte Finish, Proveil Reaper Z, Made in USA, Premium Vinyl Gun Wrap with Precut Pieces

#ad
GunSkins #ad - No rain, no worries! . Use a heat gun to conform the vinyl to the surface and a hobby knife to trim to fit. If you need to take it off, simply add heat and remove. This automotive grade vinyl is 100% waterproof and non-porous. Fits any ar-15 rifle – designed to fit any tactical, and one set of mag skins.

Plus additional material for the forend, or airsoft AR-15 compatible rifle. Kit includes pre-cut pieces for the receiver, military, dust cover, pistol grip, buttstock, and other accessories. Easy to install vinyl wrap – do it yourself installation means you have creative control. This is perfect for hunting waterfowl when you are knee deep among the reeds. Switch patterns for different hunting seasons with ease! Lifetime warranty – this gunskins product has a lifetime warranty which covers normal use by the initial user of this product.

Choose how much or how little to wrap with the help of our one-of-a-kind precut templates and installation videos. No cure time, ready for immediate use! Waterproof non-reflective matte finish – gunskins are made from high-performance, no rust, premium vinyl. Removeable and leaves behind no residue – this non-permanent finish will not alter the resell value of your gun. The surface will be just as it was prior to installation. Install in just a few hours.
BrandGunSkins #ad
ManufacturerGunSkins #ad
Height8.75 Inches
Length11 Inches
Weight6 ounces
Width0.25 Inches
Part Numberar-15-rifle-skin-reaper-z

8. DPMS

#ad

DPMS SBR Full Auto Spare Magazine DSFAM

#ad
DPMS #ad - Buy more than one - And keep the action going. Drop-down style with 25-round bb capacity bbs not included. Holds 2 12-gram co2 powerlet cartridges co2 not included. Use with genuine crosman co2 cartridges and bbs. Dpms sbr spare magazine.
BrandDPMS #ad
ManufacturerCrosman Corporation #ad
Height1 Inches
Length1 Inches
Weight1 Pounds
Width1 Inches
Part NumberDSFAM
ModelDSFAM

9. GunSkins

#ad

GS Skull Tan, Premium Vinyl Mag Wrap with Precut Pieces, 100% Waterproof Non-Reflective Matte Finish, GunSkins AR-10 Mag Skin, Made in USA, Easy to Install and Fits 20/25 rd Magazines

#ad
GunSkins #ad - This is perfect for hunting waterfowl when you are knee deep among the reeds. Easy to install vinyl wrap – do it yourself installation means you have creative control. Fits any ar-10 magazine – designed to fit any 20 or 25 round 7. 62 x 51 nato. 308 remington magazine.

No cure time, ready for immediate use! Waterproof non-reflective matte finish – gunskins are made from high-performance, premium vinyl. Install in just a few hours. Also works on airsoft mags, too! Kit includes pieces for the left and right side of a single magazine. Use a heat gun to conform the vinyl to the surface and a hobby knife to trim to fit. Switch patterns for different hunting seasons with ease! Lifetime warranty – this gunskins product has a lifetime warranty which covers normal use by the initial user of this product.

This automotive grade vinyl is 100% waterproof and non-porous. No rain, no rust, no worries! This gunskins product will be free of fading for the duration of the warranty period as long as initial user has the product correctly installed on a firearm, firearm accessory or other GunSkins approved application. If you need to take it off, simply add heat and remove. Removeable and leaves behind no residue – this non-permanent finish will not alter the resell value of your gun.
BrandGunSkins #ad
ManufacturerGunSkins #ad
Height7 Inches
Length8.75 Inches
Weight0.13 Pounds
Width0.25 Inches
Part Numberar-10-mag-skin-skull-tan

10. HOANAN

#ad

Hoanan Tactical Molle Magazine Pouch Open-Top Single Rifle Pistol Mag Pouch Cartridge Clip Pouch Hunting Bag 2pack-Upgrade Black, Double Mag Pouch

#ad
HOANAN #ad - Lifetime guaranteed the mag pouch and best 7/24 service for you. Any problem, pls remember to contact with us first. No worry about loose while you attached it to your gun belt or tactical vests. Constructed of 1000d nylon for the ultimate in durability Open Top Pockets, MOLLE compatible straps on the back.

Keep everytime be ready! Elastic straps are good for elongated and tightened the items and keep my mags in perfectly. The front molle system design also good to hold a variety of multi-tools and flashlights. Combines one rifle mag pouch and modular one pistol mag pouch, stacker design, Open Top Pockets.

We promise to give you a 100% satisfactory solution. 2-pack versatile double pistol molle mag pouch will hold almost any pistol magazine. Upgradet design of the back molle strap to the snap button. Size: 11. 5 * 7. 5 * 6cm 4. 6 * 3 * 2. 4 inch. Rifle mag pouch can hold hk, pmag, on top, lr20 and m14 magazines, ak 30/ 40, glock, m9/Beretta 92, HK 45, FAL, the pistol mag pouch holds 1911, ARC, and XD mags.
BrandHOANAN #ad
ManufacturerHoanan #ad