3M 6396 Adhesion Promoter Attachment Tape Liquid Primer – 4 Pack

#ad
3M 13 #ad - Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm. 4 packets. Can be applied on common low surface energy plastics used for automotive dash and interior trim applications TPO, PP, PPO, +ABS, PC, etc.

. For more information go to www. P65warnings. Ca. Gov. 3m 06396 adhesion promoter, sponge applicator packet 4 Packets  Liquid primer for enhancing adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. Liquid primer packaged in convenient, single-use applicator packets. One packet covers approximately 150 square inches of substrate at the recommended coating thickness.

3M 6396 Adhesion Promoter Attachment Tape Liquid Primer - 4 Pack #ad - Strongly recommended for use with 3m dubble sided tape on exterior body side moldings, trim and claddings, particularly those parts made of injection molded plastics such as TPO and RIM. Liquid primer packaged in convenient, single-use applicator packets. Strongly recommended for use with 3m dubble sided tape on exterior body side moldings, trim and claddings, particularly those parts made of injection molded plastics such as TPO and RIM.

Can be applied on common low surface energy plastics used for automotive dash and interior trim applications TPO, PPO, PP, +ABS, PC, etc.

#ad



3M 06384 Automotive Acrylic Plus Attachment Tape

#ad
3M 06384 #ad - Overall product Weight: -02 pounds. Overall depth - Front to Back: -5. 8 inches. Stronger, higher performing, stress handling products than other automotive attachment tapes. Dimensions: overall Height - Top to Bottom: -07 inches. Tape 3m-6384. 1/2x 5yd attach. Overall width - Side to Side: -5. 8 inches. Uses automotive OEM approved acrylic foam core and adhesive technology.

. 3m6384 features: -. 045" thick, medium density black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner. These tapes offer more robust performance to a wide variety of automotive substrates.

#ad



Rugged Ridge 11216.32 Black Entry Guard, 4 Pack

#ad
Rugged Ridge 11216.32 #ad - Rugged ridge created these all terrain Door Entry Guards to prevent the unsightly scuffs and scratches that happen just by climbing in and out of your Jeep. Sets are available for both 2 and 4-Door JL models. Constructed of a super-tough thermoplastic, each guard features an inlaid all-terrain tread pattern so they look just as great as they work- whether the doors are on or off.

Rugged Ridge 11216.32 Black Entry Guard, 4 Pack #ad - Defending those unprotected door sills couldn’t be any easier. And installation is a breeze with the provided automotive-grade adhesive foam tape. Easy installation with the provided automotive-grade adhesive foam tape. Each guard features an inlaid all-terrain tread pattern. Limited 5 Year Warranty. When you install these door entry Guards, you’ll be preserving your precious paint and adding a cool accent at the same time.

Prevent the unsightly scuffs and scratches that happens by climbing in and out. D627, 285 1/2x 5yd attach. Preserve paint while adding a cool accent to your Jeep. Patent No. Tape 3m-6384.

#ad



3M 06384 Acrylic Plus Double Sided Attachment Tape 1/2" x 5yds

#ad
3M 7551154 #ad - Each guard features an inlaid all-terrain tread pattern. Dimensions: overall Height - Top to Bottom: -07 inches. Tape 3m-6384. Preserve paint while adding a cool accent to your Jeep. Limited 5 Year Warranty. Overall product Weight: -02 pounds. Prevent the unsightly scuffs and scratches that happens by climbing in and out.

1/2x 5yd attach. 3m6384 features: -. 045" thick, medium density black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner. Overall depth - Front to Back: -5. 8 inches. Easy installation with the provided automotive-grade adhesive foam tape. Stronger, higher performing, stress handling products than other automotive attachment tapes.

3M 06384 Acrylic Plus Double Sided Attachment Tape 1/2" x 5yds #ad - These tapes offer more robust performance to a wide variety of automotive substrates. Overall width - Side to Side: -5. 8 inches. 06384. Uses automotive OEM approved acrylic foam core and adhesive technology.

#ad



3M 4298 Adhesion Promoter, 5 Sponge Applicators Choose 3, 5 or 25 Qty

#ad
3M 8542053274 #ad - Limited 5 Year Warranty. Works great for low surface energy substrates like rubber and plastic. 5 total, 2. 5cc per packet. 06384. 3m adhesion promoter 4298 is a liquid primer used for most low surfaces energy plastics. Prevent the unsightly scuffs and scratches that happens by climbing in and out. Preserve paint while adding a cool accent to your Jeep.

This would include common low surface energy plastics used for automotive dash and interior trim applications TPO, PPO, PC, PC + ABS, PP, etc. Easy installation with the provided automotive-grade adhesive foam tape. Use to increase the bond strength of Acrylic Tape. 1/2x 5yd attach. Each guard features an inlaid all-terrain tread pattern.

3M 4298 Adhesion Promoter, 5 Sponge Applicators Choose 3, 5 or 25 Qty #ad - . Tape 3m-6384.

#ad



3M Exterior Attachment Tape, Ideal for Moldings, Emblems and Trim, 1/4 in width x 5 yards in length, 1 roll

#ad
3M 38583 #ad - Tape 3m-6384. Use to increase the bond strength of Acrylic Tape. Prevent the unsightly scuffs and scratches that happens by climbing in and out. Limited 5 Year Warranty. Each guard features an inlaid all-terrain tread pattern. 1/2x 5yd attach. Easy installation with the provided automotive-grade adhesive foam tape.

3M Exterior Attachment Tape, Ideal for Moldings, Emblems and Trim, 1/4 in width x 5 yards in length, 1 roll #ad - 3m exterior attachment tape is a high performance automotive tape ideal for attaching exterior automotive body side moldings, wheel lip molding, door edge molding, emblems, nameplates, badges, LED Lights and trim. Works great for low surface energy substrates like rubber and plastic. 06384. Ideal for attaching moldings, emblems and trim to exterior painted automotive surfaces.

Preserve paint while adding a cool accent to your Jeep. 5 total, 2. 5cc per packet.

#ad



3M Super Strength Molding Tape, Highly Durable & Easy to Use, 7/8in wide x 15 feet in length, 1 roll

#ad
3M 3616 #ad - Works great for low surface energy substrates like rubber and plastic. Limited 5 Year Warranty. 5 total, 2. 5cc per packet. Tape 3m-6384. Easy installation with the provided automotive-grade adhesive foam tape. 06384. Each guard features an inlaid all-terrain tread pattern. Cut to size. Ideal for attaching moldings, emblems and trim to exterior painted automotive surfaces.

3M Super Strength Molding Tape, Highly Durable & Easy to Use, 7/8in wide x 15 feet in length, 1 roll #ad - Strong bonding and easy to use. Prevent the unsightly scuffs and scratches that happens by climbing in and out. Use to increase the bond strength of Acrylic Tape. 1/2x 5yd attach. No mess. Preserve paint while adding a cool accent to your Jeep. Strong bonding and easy to use. Ideal for attaching vehicle body side moldings, trim and emblems.

Cut to size, no mess.

#ad



3M Scotch 5952 VHB Tape: 1/2 in. x 15 ft. Black

#ad
3M Scotch 5952/BLK055 #ad - Prevent the unsightly scuffs and scratches that happens by climbing in and out. Each guard features an inlaid all-terrain tread pattern. If you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical information- core: 3 inch diameter - backing/carrier: closed-cell acrylic foam - adhesive: modified acrylic - release liner: red PE film - Thickness: 50 mils carrier, liner 45 mils carrier, adhesive, adhesive 5 mils liner - Adhesion: 320 ounces per inch to stainless steel test panel - Tensile Strength: 90 pounds per inch longitudinal - Application Temperature: 50F to 100F - Service/Operating Temperature: up to 250F 1/2x 5yd attach.

This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. 3m double-sided tape automotive, in many cases, rivets, replace liquid adhesives, heavy-duty applications can, spot welds, and other permanent fasteners.

3M Scotch 5952 VHB Tape: 1/2 in. x 15 ft. Black #ad - Note: it is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. No mess. Tensile strength: 90 pounds per inch longitudinal. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints.

Notes: as with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.

#ad



3M Scotch 5952 VHB Tape: 1 in. x 15 ft. Black

#ad
3M Scotch 5952/BLK15 #ad - Notes: as with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. G. Tensile strength: 90 pounds per inch longitudinal. Adhesive: modified acrylic. If you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical information• core: 3 inch diameter • backing/carrier: closed cell acrylic foam • adhesive: modified acrylic • release liner: red PE film • Thickness: 50 mils carrier, liner 45 mils carrier, adhesive, adhesive 5 mils liner • Adhesion: 320 ounces per inch to stainless steel test panel • Tensile Strength: 90 pounds per inch longitudinal • Application Temperature: 50F to 100F • 1/2x 5yd attach.

3M Scotch 5952 VHB Tape: 1 in. x 15 ft. Black #ad - Rough surfaces may require additional tape. Carrier/backing: closed-cell acrylic foam. Tape 3m-6384. Recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load; although rough surfaces may require additional tape. Application temperature: 50F to 100F. Use to increase the bond strength of Acrylic Tape.

. Each guard features an inlaid all-terrain tread pattern.

#ad



3M 03614 Scotch-Mount 1/2" x 15' Molding Tape 2-Rolls

#ad
3M 3614-2 #ad - No mess. Thickness: 50 mils carrier, liner 45 mils carrier, adhesive, adhesive 5 mils liner. Adhesion: 320 ounces per inch to stainless steel test panel. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm.

3M 03614 Scotch-Mount 1/2" x 15' Molding Tape 2-Rolls #ad - Application temperature: 50F to 100F. Adhesive: modified acrylic. For more information go to www. P65warnings. Ca. Gov. 5 total, 2. 5cc per packet. Limited 5 Year Warranty. Cut to size. Thickness: 50 mils carrier, adhesive, liner 45 mils carrier, adhesive 5 mils liner. Dynamic overlap Shear: 80 pounds per square inch. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints.

Tape 3m-6384. Release liner: red PE film. No mess.

#ad



3MTM Automotive Acrylic Plus Attachment Tape, Black, 1/2" x 20 yds.

#ad
3M 6382 #ad - Works great for low surface energy substrates like rubber and plastic. 3m double-sided tape automotive, rivets, spot welds, in many cases, heavy-duty applications can, replace liquid adhesives, and other permanent fasteners. Note: it is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load.

Each guard features an inlaid all-terrain tread pattern. 3m automotive acrylic Plus Attachment Tape 06382 is a. 045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner. Carrier/Backing: closed cell acrylic foam. Stronger, higher performing, stress handling products than other automotive attachment tapes.

3MTM Automotive Acrylic Plus Attachment Tape, Black, 1/2" x 20 yds. #ad - 3m 5952 heavy duty mounting vhb tape is black, double-coated vhb adhesive tape with an acrylic foam core. Tape 3m-6384. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. Thickness: 50 mils carrier, adhesive, liner 45 mils carrier, adhesive 5 mils liner.

Adhesion: 320 ounces per inch to stainless steel test panel. Cut to size. Rough surfaces may require additional tape.

#ad